Funkwerk WI2040n Manual do Utilizador descarregar pdf (Página 84)

Menu Function

WLAN This menu shows you the WLAN connections statistics.

Bridges In this menu you can view the current values of the configured

bridges.

Hotspot Gateway This menu shows a list of all bintec Hotspot users.

QoS In this menu, statistics are displayed for all interfaces for which

QoS has been configured.

7.3.2 SNMP shell

SNMP (Simple Network Management Protocol) is a protocol that defines how you can ac-

cess the configuration settings.

All configuration settings are stored in the MIB (Management Information Base) in the form

of MIB tables and MIB variables. You can access these directly from the SNMP shell via

SNMP commands. This type of configuration requires a detailed knowledge of our devices.

7.4 BOOTmonitor

The BOOTmonitor is only available over a serial connection to the device.

The BOOTmonitor provides the following functions, which you select by entering the cor-

responding number:

(1) Boot System (reboot the system):

The device loads the compressed boot file from the flash memory to the working

memory. This happens automatically on starting.

(2) Software Update via TFTP:

The devices performs a software update via a TFTP server.

(3) Software Update via XMODEM:

The device performs a software update via a serial interface with XMODEM.

(4) Delete configuration:

The device is reset to the ex works state. All configuration files are deleted and the

BOOTmonitor settings are set to the default values.

(5) Default BOOTmonitor Parameters:

You can change the default settings of the BOOTmonitor of the device, e.g. the

baud rate for serial connections.

(6) Show System Information:

Shows useful information about your device, e.g. serial number, MAC address and

software versions.

7 Access and configuration Funkwerk Enterprise Communications GmbH

72 bintec WLAN and Industrial WLAN

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 431 432

Sem comentários

Funkwerk WI2040n Manual do Utilizador Página 84